ASTM F67 Titanium Bar

ASTM F67 Medical Standard for Titanium Rods

ASTM F67 Titanium Bar
Material	Unalloyed titanium
Grade	Gr1,Gr2,
Technology Standard	ASTM F67,
Specification	Diameter & Side>2~20mm, or according to client's demand
Variety	Precision Forging bar,Extrusion bar,Rolled bar & Polished bar
Delivery State	Hot working state(R) Cold working state(Y) Annealing state(M)

 

ASTM F67 Titanium Bar Picture display

 

1. Light weight - [specific gravity] (specific gravity is 60% of steel, 1.7 times that of aluminum)

2. Thermal expansion [expansion coefficient] (lower heat than 18-8) stainless steel and aluminum heat)

3. Low thermal conductivity - [thermal conductivity] (almost the same as 18-8 stainless steel)

4. Low Conductivity - [Conductivity of 3% Copper] (Conductivity of Copper)

5. Compliant - target elastic modulus] (half of iron or stainless steel, same as copper)

6. Non-Endpoint - [Permeability] (Non-Endpoint Material; Permeability = 1.0001)

ASTM F67 Titanium Rod Titanium is 30% lighter than steel but nearly 50% lighter. 60%, but the strength is aluminum stronger than aluminum titanium ratio.

Titanium has excellent strength retention at degrees Fahrenheit. Many different materials, especially salt water, when exposed, when exposed to a distinctly expressive and tough.

Grade 1 titanium is an unalloyed, high-strength titanium product, containing oxygen, with high shape; this titanium grade is used in one-, low-quality and low-brightness surfacing devices.

Grade 2 titanium is a typical high-strength titanium product. This grade is used for an off-vehicle, engine, and characteristic; good weldability and wear resistance are titanium alloys' remarkable parts.

Grade 3 titanium is a high strength product with excellent wear resistance and good titanium weldability. This grade is mainly used for automotive, non-automotive and engine parts.

Grade 4 Titanium Alloy Types Typical Alloy Strength Pure Atypical Titanium Alloys Typical Uses, Automotive Engines, Pipes, Dust Collectors, Best Hydraulic Materials. The excellent performance and durability of the product are its hallmarks.

Grade 5 titanium (grade 5 titanium) is a special type of titanium, 6% aluminum and 4%; is a strength. Technical Information Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% aluminium and 4% ELI, (Extra Low Interstitial).

1. Competitive price. 

2. Our strengths over other suppliers.

3. Reliable quality on the base of  the same price.

4. Timely delivery as your requirements.

5. Professional service to cut much purchasing costs down.